Anhui Wenzhuo Auto Parts Co., Ltd. Specializing in producing cast wheels from 13 to 24 inches with low pressure, it covers an area of150,000 square,meters, with 1,800 employees and annual output of 2.6 million aluminum alloy wheels.

　　Forging wheel hub modification steps

　　Generally, when the car leaves the factory, it is equipped with the original casting wheel. There are many friends who will transform and upgrade the wheel out of performance and appearance needs, but the average friend has little experience. There are generally two demands, one is the appearance.At this time, you need to find more styles and styles to compare;Other friends pay more attention to the performance of the wheel, such as heat dissipation, fuel economy and safety, at this time you should focus on some forged wheels.That requires us to have a general understanding of the modification steps.

　　1. Determine the wheel size of the current vehicle, which is generally found in the outer edge of the tire. I marked the tire parameters in the figure.

　　2, determine the size of the wheel you want to modify, the general principle is about 2 inches is acceptable range, but need to take care of your suspension space and the gap between the brake disc and the brake disc.

　　3. Remove the old wheel from the car, install the new wheel, and then inflate the new wheel.

　　4. Adjust the dynamic balance of the new wheel, and then load the new wheel to see the effect after the modification.