Structure and connection of three-piece forged wheel

　　The three-piece wheel include Inner and Outer, Middle Disk, and then assembled by screws, Three parts can be used completely different surface treatment process,It is the most personalized.There are no restrictions on ET.It is very popular in modified cars

　After the assembly of the three-piece forging wheel, it is necessary to do a good job of sealing adhesive to ensure air tightness, and do not need to do a good job of assembly by welding.

　　There are two ways to connect the spokes and rims of multi-piece wheels. One is to use professional bolts or nuts to make a good connection, and the other is to use welding to make a good connection. Because the three-piece wheels should guarantee the air tightness of the wheels, it is natural that welding or bolts should not be used to make a good connection.

　　In addition to considering the performance of the wheel, a very large part of the consideration is the appearance of the wheel, and the wheel part of the multi-piece can be shared, to change the shape of the wheel, as long as the replacement of different styles of the middle plate can be.

　　Through the wheel of different size and spokes can be arbitrarily combined into different styles, at the same time to adapt to the needs of individual modification, which is one of the advantages of the multi-piece wheel.

　　Connection mode between wheel width and rim of multi-chip forged wheel

　　1. Special bolt/nut connection　

　　2, welding

　　3. Three-piece wheel, because the rim consists of three parts: inner, outer and Disk, it should be sealed to ensure air tightness after assembly.